Call Us - +91 22 6679 2896, +91 98679 60169, +91 98922 56045.
Email - info@lockformingmachine.com

Three_Roll_Bender

Three Roll Bender
Machine Brochure

 
Three Roll Bender
   
 
 
FORMMASTER'S 3 Roll Motorized Bending Machine have an initial pinch type arrangement. The three rolls are asymmetrically arranged to produce rolled cylinders to a high accuracy.

It is ideally suited for mass production and so designed to enable quick adjustments for thickness and diameter.

All the three rolls are of same diameter. The two front rolls are known as pinch rolls; the top roll is in a fix position. The lower front roll is adjustable up and down to suit the thickness of the sheet/plate being rolled. The rear roll or bending roll is adjustable up and down to determine the diameter of the cylinder to be produced.

The formed component can be easily removed in a few seconds simply by lowering the tail hinge & moving down the lower roll which will release the pressure on the rolled sheet & by rotating the screw at the other end which will cause the top roll to tilt thereby permitting the removal of the finished product.

 
 
3_Roll_Bender
Three_Roll_Bender
 
SPECIFICATIONS  
Working Length 1250mm 1500mm 2000mm
Sheet Thickness 1.5mm 1.5mm 1.5mm
Diameter of Rolls 90mm 90mm 90mm
   

CITIZEN ENGINEERING WORKS

10, Amar Industrial Estates, Andheri-Kurla Road, Sakinaka, Andheri (East), Mumbai - 400 072, India.

Copyright © 2009 - 2010 CITIZEN ENGINEERING WORKS. All Rights Reserved